FirePick now 3D printing

It is now since several weeks that my Firepick has already started working as a 3D printer.

There are some (expected) issues with calibration that i had not yet time to solve, this make a bit difficult to print large objects as the head does not move on a perfect flat plane but goes down when moving away from bed center point.

Right now it is working with an Arduino mega/ramp and the modified Marlin firmware from https://github.com/firepick-delta/Marlin

DSC_0643
Ramps1.4 with printed support/fan brackets
DSC_0636
In the process of printing the updated end effector mount for 3d printing hot end
DSC_0644
Updated end effector and 3D printing hot end mount

Leave a Reply